Tubular motor for roller shutters

Automation for roller shutters CE,TUV,RoHS,CB Ensure 20000 times proper working Low noise<38dB 3-8Nm ,230/110V

Automation for roller shutters ,tubular motor 10Nm

Widely used on many roller products: roller doors, roller shutters, curtains, blinds and screens

Control mode: remote control, switch, motorized with manual override

Tubular motors advantages:

Non -malfunction for the brake

Double sided magnetism, cone magnetism, electromagnetism brake system is used in this new type motor in order to meet different customers'requirement. It takes our team many years' research and test for the material of brake system which makes it perfect.

Adopted the plastic sealed technology, all the components have the accurate location dimension, low coefficient of the variation, and the service life time can be amounted to 10 years. Advanced design and crafts, the highest torque

Low noisedelicate design and manufacture, the lowest noise is less than 38db, nearly silent move is bigger than the similar products in the same condition.ment .

Strong intensity  Adopted the special material, the gear is more wear-resisting, toughness and steel feature is more stronger which will increase the service life of the  gear box.

Oil proof   The sealed structure helped the gear oil hard to leak, ensure the gear works normally longer.

Accurate limit   The accuracy for limit is <+-0.5 degree tolerance, limit configuration by screw pole drive makes accuracy for limit <+- 1.5 degree

Large effective limit   Reasonable and compact design increases effective distance for limit very much, and the effectiveness could reach 50 circles.

Build-in remote control   Good quality and stable receiver built in motor not only shorten the installation time ,Effective distance for remote control system is more than 30m. Tubular Motor , Roller shutter motor SLM35 Specification: 

Voltage: 220/230V Frequency: 50/60Hz Power: 135W Nominal torque: 3 to 10Nm Nominal speed: 28/32rpmfaWidely used for small curtain, screen, awning and aluminum roller shutter Load requirement: Less than 25kg

Model SLM35N	3	6	8	10
Voltage	220/230V 110/120V50/60HZ
Power ( w)	101/108	113/120	115/120	115/120
Current (A)	≤05./1.1	≤05./1.1	≤05./1.1	≤05./1.1
Nominal speed (rpm)	28/32	28/32	28/32	28/32
Nominal torque ( Nm )	3Nm	6Nm	8 Nm	10Nm
Work time (min )	4	4	4	4
Insulation level (class)	B	B	B	B
Protection	IP44	IP44	IP44	IP44
Tube Diameter	35mm	35mm	35mm	35mm
Overall size (mm)	584	584	584	584
Weight (kg)	1.3	1.3	1.3	1.3

Tubular motor for roller shutters